Solar Power in Florida

Archive for December, 2011

How it Will Benefit Us All: Gasification

If you search for gasification and terms like “wood stove” on video sharing sites these days you will see demonstrations of wood being burnt in little stoves which seem to something almost miraculous and quite different from our idea of wood as a fuel. These little boilers light rapidly, produce no detectable smoke after the initial lighting and firing, and burn very hot.

So what is the technique which is being used, and how might it help us all in weaning society off fossil fuels?

What you have seen is a method of gasification. It differs from combustion in that it uses just 20% to 30% of the air or oxygen necessary for complete fuel combustion. During gasification, the amount of air supplied to the gasifier is carefully controlled with the effect that only a small part of the fuel burns completely. Trials of this process have illustrated that up to 70% of the energy value of the fue used can be recovered as what is known as synthesis gas, or syngas. This producer gas can also be used for various applications similar to natural gas.

This is a part of the magic, and not one really shown in the YouTube type videos, but it makes this method even more useful. This is due to the fact that syngas can be put to useful work, in both drying the feed fuel prior to gasification and after collection and storage it can be used as a fossil fuel replacement, and renewable energy source. When a gasification plant also includes Combined Heat and Power (CHP) and/or electricity export from the site, the gains are even more impressive.

Gasification in addition promises to be the most efficient long-term solution for capturing carbon while utilizing these valuable feedstocks, and storing the CO2 for very long priods, to reduce or halt global warming.

Gasification of wood and wood-type residues and waste in fixed bed or fluidised bed gasifiers with subsequent burning of the gas for heat production is has become state of the art with designers of thes systems working hard to gain the absolute maximum efficiency out of these systems.

These wood gasifiers which are located primarily in the Scandinavian countries are used almost entirely for space heating heat generation. Gasification of biomass is the renewable fuel system preferred by many, and can be defined as the thermal conversion of solid biomass to gaseous fuel.

Gasification has been around for over a hundred years, but the benefits of biochar are only now being discovered. Furthermore, it is still a wide-open field.

Before electric lighting was available in cities there were street lamps fuelled by gasified coal. It is easy to forget that the process has been reliably used on a commercial scale worldwide for more than 50 years in the refining, fertilizer, and chemical industries, and for more than 35 years in the electric power industry. More than 75 companies involved in the development, licensing, and use of these technologies as well as engineering, construction, equipment manufacturing and production of synthesis gas by gasification from coal, petroleum coke, heavy oils and other hydrocarbons.

Gasification has been proven to be a viable technology for CO2 capture and reducing SOx, NOx, particulate matter, and mercury emissions from coal and petcoke-fired power plants, synthetic fuels production, and chemical facilities.

Plants in this category have been capturing carbon dioxide for several decades in chemical plants in China and the United States. It also has potential contributions to make to both transportation and electrical power energy markets. With ongoing concerns about the price and availability of oil, populous countries like the U.S. gasification has proven to be in high demand and quite successful. However, it can also be used in conjunction with gas engines and gas turbines to obtain a higher conversion efficiency than conventional fossil-fuel electric power generation. Gasification can help meet renewable energy targets, address concerns about global warming, and contribute to meeting global environmental targets.

Steve has built a great web site where there is a lot more information about gasification. This is a hot subject indeed for this technology which has become an essential read for all those in alternative energy and interested in taking action to reduce the impact of climate change.

Clean Green Engine Fox News

Antarctic Peninsula Climate – A Change in Krill Ecosystem

Antarctic Peninsula has been experiencing warming trends for over 40 years with an increase of 2-3 C, thus correlating with lower sea ice conditions in the Amundsen Sea and Bellinghausen Sea. Warming temperatures around the Antarctic Peninsula is changing the dynamics of the ecosystem. The rise in atmospheric temperature is causing increasing in melting of freshwater glaciers and ice shelves. Fresh water emerging into the sea counteracts the salinity within a regional area. Changes identified are;

• Decrease in sea water salinity up to 60 miles offshore
• Lower sea ice
• Decreased krill population
• Increased salp (open ocean tunicate that is reminiscent of a jelly-fish) population
• Increase in cryptophytes (single cell phytoplankton algae)
• Decrease in diatom phytoplankton
• Increase in carbon sequestering in deep ocean sinks
• Decrease in carbon availability in the food chain

The Antarctic Krill (Euphausia superba), a small shrimp like crustacean is the most important zooplankton species associated with the sea ice and plays a crucial role in the Antarctic food web. On a regional basis the amount of krill appear to be declining in the southern ocean. There are definitely lower trends in krill population during lower sea ice years around Antarctica. Part of the rational for the population decline is that ice algae rely on the sea ice for protection and growth. The krill need the sea ice in order to feed on the algae and phytoplankton.

Krill occur in groups or large swarms. They are less than 3 inches in size and feed primarily on phytoplankton and sea ice algae. Krill filter diatom phytoplankton out of the water column and scrape algae from the sea ice. Apart from frequenting the sea ice to feed, krill in particular juveniles, seek protection from predators in the many nooks and crannies formed by the deformed sea ice floes. Krill is the staple food of many fish, birds and mammals in the Southern Ocean. The biomass of Antarctic krill is considered to be larger than that of the earth’s human population.

Sea- ice algae utilizes atmospheric carbon dioxide for its energy source, the same as plants do on land. Krill diet of the sea-ice algae and phytoplankton is essential for converting the carbon for use in higher animals such as fish, birds, and whales. This carbon conversion is a very critical role in predatory nutrition. Additionally krill do eliminate some of the silica from the diatom shells and carbon in sticky balls that sinks nearly two miles into the deep ocean. These cold, deep waters are able to contain carbon dioxide and prevent the gas from rising to the surface, thus immobilizing carbon that is not passed into the food chain.

In recent years there have been increases in algae phytoplankton called cryptophytes. Mark Moline, California Polytechnic State University, states that the cryptophyte population correlates with warmer temperatures and lower salinity waters that are produced by the melting of the freshwater glacier. Cryptophytes measure around 2 mm, while other plankton in the Antarctic waters are much larger and measure 15 to 270 mm. Along with the increase in cryptophyte population an increase in salp, a pelagic tunicate, population has also occurred. There are differences between salps and krill. Salps feeding efficiency is capable of grazing on smaller food sources less than 4mm, whereas, the Antarctic Krill efficiency declines on any food less than 20 mm. The salps compete with krill for the phytoplankton and thus decrease the krill population. Additionally the salps feed on krill larvae, which also cause a decline in krill numbers.

The warming trend in the Antarctic Peninsula is showing a pattern of increasing cryptophytes over other phytoplankton and the increase in the salp. This influence is due to the low sea ice and the lowering of the salinity in the seawater. Salps and cryptophytes do better in the lower salinity, while the krill and other plankton are unable to tolerate the increased freshwater regime from the glacier ice melts. This selectivity gives preference to the salps as the dominant species while decreasing krill abundance. During lower sea ice seasons the density of krill declines while the salp population increases.

Carbon sequestering into the deep ocean from the algae and phytoplankton occur by both the salp and krill. Both species eliminate the atmospheric carbon received from the primary producing algae by producing fecal pellets by the salps and sticky balls by the krill, thereby, reducing the amount of carbon dioxide in the atmosphere. The salps though sequester more carbon into the cold deep ocean than the krill. However, the krill provides the most efficient pathway for carbon transfer up into the food chain. The cryptophyte dominated waters are less efficient in the food chain due to increased feeding by salps and the difficulty of the krill to utilize the cryptophytes as a food source. Migration patterns by penguins are changing, in part due to the changing krill population. Krill is a mainstay diet for penguins, and if the krill population changes, many other ecological changes occur with it.

Steve Bynum has worked at Palmer Station along the Antarctic Peninsula. He not only enjoyed the ecosystem along the Bellinghausen Sea but he has also witnessed the changing climate conditions.

Join Steve at http://www.climatechangenewsletters.com as we take a journey to discover the warming and cooling effects of our planet.

IDGTV: Tech News For Update

Our Family’s Commitment to Do More: The 3 R’s

So How You Do’ing? In the spirit of recycling, I thought I would use those famous words from Friends character Joey. I have shared with you in other articles ideas that my family are using to cut our carbon footprint on this precious Earth that we call home.

Reducing is always a challenge, because it goes in the face of our societal values of having more and doing more, but it is the highest form of recycling.

Re-using is something that has been natural for me through out my life. It may be challenging at times to creatively transform old household items into new uses, but this has become one of the staples of our family’s efforts to be more environmentally friendly…and save money.

Recycling has become the catch phrase for the 3 R’s, but is strictly speaking altering one thing into another. It is important that we recycle as much as we possibly can, because making consumables from recycled goods is always cheaper and better for the environment than making them from raw materials. But we should recognise too that recycling should only be used after we have reduced and re-used. For our children and their futures, we must use all the arsenal of tools embodied in the 3 R’s: reducing wherever we can, re-using everything that we possibly can, and recycling every item that our councils and recycling centres will accept.

Today I am wanted to look at those things that my family could do better:

1) Reducing excess packaging. I think this might be the most challenging to tackle; partly because a great deal of it is beyond our control. We are, I admit, large consumers of electronics (blame techie husband). Have you ever noticed how much packaging goes into one tiny piece of plastic? A memory stick that is one inch by two will most often come in a plastic (non-recyclable) package with a large cardboard inset and an information packet. I recognise that this is an anti-theft device, but aren’t there other alternatives? What about putting such items behind the counter? The other side of that is that the packaging contributes to the cost of that piece of plastic and metal. Of course, this is an issue that will require a concreted effort from consumer and most likely government intervention to address. What I can do for now is to choose to purchase my fruit and vegetables loose. I am also hoping this will cut down on both spending and waste by purchasing only what we need.

2) I am going to remember to use those little switches on the power plugs. As I mentioned, being American we do not have such things. It has been hard for me change a lifetime of habits. But with my husband’s help, I am going to use these magic little buttons more often.

3) We are going to replace all batteries with rechargeable ones. About half of our batteries are rechargeable; mostly the ones in our keyboards and mousse. But over the coming weeks, we will replace all batteries with rechargeable ones…since these are particularly toxic waste in our landfills.

4) I am going to use less water when washing dishes. I have this habit of running the water to rinse dishes as I go. The new plan is to wash everything and sit it on the counter until I am done. Then use the same pan to rinse the dishes in cold water.

5) I am going to have a spring clean out. I may be doing pretty well at re-using but I could help others to do better by donating all the stuff I am not using to Freecycle, the Islington Swap Xchange, or my local Mind shop. This will make my husband very happy as he has been complaining about my daughter’s toys for a while now.

So what can you do better? Remember though this is not about being perfect, but the little things that we can realistically do and continue to do. The things that may seem so small that you don’t think they will make a difference: things that if we all did would make a huge difference. I invite you all to share your list with me.

Terri O’Neale is the mother of six; ranging in age from 3 to 22. She has been both a working and stay-at-home mother at various times in her life. She was also a single mother for almost five years, before re-marrying the love of her life at the age of forty. Obviously, she has a life-time of training in raising a family on a tight budget. In addition to these real life experiences, she possesses a bachelors degree in health education and a minored in environmental management in her masters programme.

Terri feels strongly that this is one of the most challenging times in history for the family, but she also believes that families with the will and resolve to address the pressing issues of saving money, becoming greener, leading healthier lifestyles and spending more time with one another can endure these challenging times and come out victorious in the end.

Through Frugal Family articles, blogs, videos and social networking, she helps modern families rediscover some lost art forms such as cooking, sewing, and gardening. The goal is not to go back in time or become fanatical, but to help all families find simple and effective ways that fit into their lifestyle to make moderate changes with huge impacts. For more information, check out her blog http://frugalfam.wordpress.com/.

Advanced Solar Energy Technology

How Water Extraction is Done in DC

There are many beautiful and interesting sights in Washington DC, among them are the White House which has been home to every president of the United States ever since 1800; the Tidal Basin Lake famous for its abundant Japanese cherry trees that blooms in Spring; the Lincoln Memorial and Jefferson Memorial, Washington Monument, etc.

But regardless of the beautiful tourist attractions that one could go to in the State of DC, natural calamities in the form of flooding sometimes happen. And when it does, most household residents in DC do the physical cleanup by themselves without hiring water extraction professionals or experts to deal with the situation. Prior to actual removal of water and cleaning, the starting place of the water which caused the flood should be identified as soon as possible and fixed permanently to prevent it from arising all over again.

Cleaning would usually require having to remove all visible waters first by making use of a wet vacuum pump or a bucket – depending on the volume and availability of equipment. The extraction process must be done immediately or as soon as possible to avoid a higher cost of damage inflicted by the dirty waters and also to thwart of any possibility that the area becomes a source of infectious diseases due to the presence of pathogens.

When all the water has already been extracted, floor coverings should be removed immediately and disposed properly. This includes removing items which came in contact with the flood water that are very porous, because the high absorbency rate of such materials has already contaminated the item in question making it very dirty and highly infectious. No amount of cleaning or fixing could reinstate it in its previously clean state; hence replacements should be made eventually if still needed.

Brushing all affected surfaces with a soapy water solution removes the presence of dirt. Pay particular attention to dirt which is inserted within cracks on walls and floors. Rinse the entire area by using a mop and bucket or a garden hose with a spray gadget.

When the rinsing stage has already been done, disinfecting the entire place is a must to remove remaining germ and fungal spores. Remember that disinfecting does not entirely mean total sanitation but a means of making the area or place habitable again. Never mix chlorine bleach with other cleaning products that contain ammonia as this will produce poisonous gas. Before and during application of any disinfectant, make sure to open all air passage ways and vents to avoid inhaling the vapors of the disinfecting agent upon application.

After having done the disinfection phase, the whole area must be thoroughly dried out, and drying usually takes a couple of days or weeks depending on how big the place is and the weather. The re-occupation of any living space which has been previously flooded must only be done once the area is declared by a professional water extraction expert to be absolutely dry. The dryness is tested by a moisture meter which shows the amount of moisture above and below a given area.

Leo Nov is an editorial staff member of RestorationSOS. To learn more about Water Extraction visit our website. Click here for more information on Water Extraction DC.

Both Man and Nature Cause Global Warming

It will take all of us to make a significant impact in the world against global warming. The earth is in trouble because of the pollution that we may have caused. It would seem that we are apathetic to the earth’s plea for help. Every natural disaster that is happening to the world, to us, is caused by us. We may have caused it directly or indirectly.

One of the more significant effects of the damage that we have caused this planet is global warming. We may have been feeling how it is a little warmer, how the seasons are all in disarray. It is cold when it should have been hot and it is hot when it should have been cold. Typhoons are also stronger than ever before, aside from the fact that it is more frequent. And haven’t you noticed how a little rain could cause floods? Don’t you find that weird? Well, these are all the effects of global warming and we should be alarmed by it.

That is why natural and environmental causes such as the earth day should be supported because aside from minimizing the use of electricity which is by the way one of the causes of global warming. It brings about social awareness to inform those who are oblivious to what is happening to the world and it re-educates those who are aware. Information is the key and it may be the cure if we do it together. Great things are going to happen. Just the recent earth day brought about great changes that will be felt by the people for generations to come. Can you just imagine the positive effects that this will bring to mankind? Earth will benefit if it continues yearly. Who knows maybe one day global warming will no longer be a problem.

Economics of Solar

Green Tech

Gasification Sees a New Dawn

If you search for gasification and terms like “wood stove” on video sharing sites these days you will see demonstrations of wood being burnt in little stoves which seem to something almost miraculous and quite different from our idea of wood as a fuel. These little boilers light rapidly, produce no detectable smoke after the initial lighting and firing, and burn very hot.

So what is the technique which is being used, and how might it help us all in weaning society off fossil fuels?

What you have seen is a method of gasification. It differs from combustion in that it uses just 20% to 30% of the air or oxygen necessary for complete fuel combustion. During gasification, the amount of air supplied to the gasifier is carefully controlled with the effect that only a small part of the fuel burns completely. Trials of this process have illustrated that up to 70% of the energy value of the fue used can be recovered as what is known as synthesis gas, or syngas. This producer gas can also be used for various applications similar to natural gas.

This is a part of the magic, and not one really shown in the YouTube type videos, but it makes this method even more useful. This is due to the fact that syngas can be put to useful work, in both drying the feed fuel prior to gasification and after collection and storage it can be used as a fossil fuel replacement, and renewable energy source. When a gasification plant also includes Combined Heat and Power (CHP) and/or electricity export from the site, the gains are even more impressive.

Gasification in addition promises to be the most efficient long-term solution for capturing carbon while utilizing these valuable feedstocks, and storing the CO2 for very long priods, to reduce or halt global warming.

Gasification of wood and wood-type residues and waste in fixed bed or fluidised bed gasifiers with subsequent burning of the gas for heat production is has become state of the art with designers of thes systems working hard to gain the absolute maximum efficiency out of these systems.

These wood gasifiers which are located primarily in the Scandinavian countries are used almost entirely for space heating heat generation. Gasification of biomass is the renewable fuel system preferred by many, and can be defined as the thermal conversion of solid biomass to gaseous fuel.

Gasification has been around for over a hundred years, but the benefits of biochar are only now being discovered. Furthermore, it is still a wide-open field.

Before electric lighting was available in cities there were street lamps fuelled by gasified coal. It is easy to forget that the process has been reliably used on a commercial scale worldwide for more than 50 years in the refining, fertilizer, and chemical industries, and for more than 35 years in the electric power industry. More than 75 companies involved in the development, licensing, and use of these technologies as well as engineering, construction, equipment manufacturing and production of synthesis gas by gasification from coal, petroleum coke, heavy oils and other hydrocarbons.

Gasification has been proven to be a viable technology for CO2 capture and reducing SOx, NOx, particulate matter, and mercury emissions from coal and petcoke-fired power plants, synthetic fuels production, and chemical facilities.

Plants in this category have been capturing carbon dioxide for several decades in chemical plants in China and the United States. It also has potential contributions to make to both transportation and electrical power energy markets. With ongoing concerns about the price and availability of oil, populous countries like the U.S. gasification has proven to be in high demand and quite successful. However, it can also be used in conjunction with gas engines and gas turbines to obtain a higher conversion efficiency than conventional fossil-fuel electric power generation. Gasification can help meet renewable energy targets, address concerns about global warming, and contribute to meeting global environmental targets.

Steve has built a great web site where there is a lot more information about gasification. This is a hot subject indeed for this technology which has become an essential read for all those in alternative energy and interested in taking action to reduce the impact of climate change.

Paper Bags Substitute Plastic Bags?

Bags hold an important place in our lives. They are sometimes referred to as the best personal carriers. They are made of various stuffs like cotton, synthetic, leather and so. But when it comes to general usage like for shopping, the names of two types of bags viz. plastic made and paper made bags come to our intellect. Both are fine, but the question is, which one is the best suited to our requirements. Lets discuss the peculiarities related with the two.

You might be thinking that paper bags are not as durable as those made of plastic. Also, we see that the latter are more commonly used than the former one. But, do you know plastic is a stuff which is really hazardous to the environment. It takes thousands of year to decompose. If burnt, it emits poisonous gases which again pollutes the environment. If buried in the ground, it makes the soil infertile. If thrown in the sea, it pollutes the sea water and proves to be a threat for the life of the sea creatures. One can imagine, how hazardous is plastic to our planet.

This perilous nature of plastic had forced the governments of many cities of the world to put a ban on the use of poly-bags, which are a major source of plastic pollution. Few cities of the world in which these polythene carriers are either completely or partially banned include San Francisco, New York, Texas, Germany, Dhaka, China, Kenya and Ireland to name a few. Even the government of Delhi had issued guidelines against the use of polythene. However, later on the government changed its decision to completely ban the polythene, due to some reasons. Government suggested the manufacturers to set up the recycling units on the basis of “polluter pays principles”. But the government has not completely given up the plan to ban these polythene carriers, it is in the pipeline.

In this context, paper bags are the best option. No doubt, they are unconventional, but they are eco-friendly and easy to recycle. Nowadays, there are various types of paper made bags available in the market. They are not only good looking, but also have ample of space to carry goods and are quite durable. The handmade paper bags available nowadays are designed to suit specific requirements which include carrying gifts, carrying wine, shopping etc. There is a separate bag to serve each purpose. Although, multipurpose bags are also made from paper. They are proving to be the best substitute for plastic or polythene carriers in the modern context.

Now, as we have told you every significant fact related to plastic and paper bags, It’s upon you which one to choose. The hazardous and non-disposable polythene, or the environment friendly and elegant paper bags.

For more information on paper bags, paper baskets, miscellaneous paper products and other handicraft items, you may visit the following sites:
http://www.handmade-paper-products.com/
http://online-handicrafts-center.blogspot.com/

stove demo in Phuket

Clean Green Engine Fox News

Recycling of Electronics

Society’s technological advancements have grown significantly over the years. Electronics devices such as telephones, cell phones, radios, CD and DVD players, televisions, and computers are products that are used in every household. These items are just a few of the many electronic devices that can cause serious environmental damage due to their toxic components. Electronics that are in need of disposal are referred to as e-waste, or electronic waste. Because of the advancement of electronic products, there has been a growing concern about the hazards of electronic waste. Some of these concerns include: improper disposal of toxic materials, health and safety concerns for people disposing of these items, as well as dangers to the soil and water supply. For instance, electronics are made using a considerable amount of toxic substances such as lead, cadmium, aluminum, zinc, copper, and plastics which can all leak poisonous material in the ground and water. These environmental concerns have resulted in the establishment of electronic recycling facilities and industries who take old electronics such as computers for the purpose of recycling and safe disposal.

Electronics containing materials such as metals, plastic, are valuable to the recycling companies. Disposing of electronics through a recycling company will result in fewer electronic devices going into landfills and lower carbon emissions.

Recovering Raw Materials: Recycling electronics involves recovering raw materials from the electronic equipment. Materials such as steel, copper, wires, aluminum, brass, plastics, glass,etc., are extracted and sold to smelters so they can create raw materials. Depending on the type of metal being extracted, they can be processed and used in products required by such businesses as the steel, construction and cement industry. Plastics and wood can be used as fuel to provide heat to industrial furnaces which converts to steam. Metals such as copper are sold to metal refineries.

Plastics: Plastics from such items as computers, computer mice, and keyboards, are sent through shredding processes and machine sorted. They are then sent to other recyclers for further processing.

Larger Electronics: Items such as televisions and computer monitors are dismantled by hand. The leaded glass cathode ray tubes are removed and disposed of safely. Plastics, copper, and circuit boards are removed, separated, and processed.

Hazardous Items: Toxic items are removed from electronic devices and disposed of safely. Toxic substance can include leaded glass, rechargeable batteries, non-rechargeable batteries (i.e.alkaline, lead acid, cell batteries) mercury in lamps and switches, parts containing polychlorinated biphenyls, as well as ink and toner cartridges. The remaining non toxic materials are processed and the recyclable materials are recovered. The materials are shredded and separated according to type. For instance, they can be divided into such materials as steel, copper, aluminum, and plastic.

Refurbished Electronics: There are now many companies that acquire used computers, repair and update them, and resell them at a much lower price. This is a great way to keep electronics out of landfills and make technology more affordable.

Donate Your Computer: If you are getting rid of your old computer because of a recent upgrade, consider donating it to charity. Many schools and non profit organisations are in need of computers. There are companies and businesses that will take your computer, refurbish it, and donate it to a needy cause. Make sure your computer is wiped clean of all information before donating it. Donating your computer helps the community and the environment.

We are fast becoming a technology dependent society. When it comes to protecting and conserving our environment, we have to adapt and change our technological practices to ensure a sustainable future. Recycling electronics is a great way help the planet.

Know that repairing a computer or laptop repair Toronto is not cheap, but it can be cheaper than having to replace the computer. If you run into these situations, you will need to hire a onsite computer repair service Toronto.

How to Report Greenhouse Gases (GHGs) – A Summary of the Pending GHG Regulations

The newly formed Obama administration has listed greenhouse gas (GHG) tracking and reporting as a major goal, with the objective of protecting the future of the environment by reducing today’s carbon footprint. If no action were taken, the makeup of the earth would significantly altered. Future actions will establish a market drive carbon cap and trade program to drive GHG emissions reductions.

Greenhouse Gas tracking is outlined in The Climate Registry Protocol, which details the requirements for mandatory monitoring and tracking. The premise around greenhouse gas tracking are included in the U.S. Clean Air Act, aimed at improving air quality and lowering greenhouse gas emissions.

The Environmental Protection Agency (EPA) proposes mandatory reporting of the gases contributing to global climate change from about 13,000 facilities nationwide. These facilities account for the majority of greenhouse gas emissions within the United States and present a logical starting point for emissions reductions in the US. The regulation would cover companies that either release large amounts of greenhouse gases (GHG) directly or produce or import fuels and chemicals that when burned emit large amounts of carbon (CO2) gases.

One of the major focuses of the Greenhouse Gas tracking protocol is refrigerant gases used in refrigeration and cooling systems by numerous facilities, including manufacturers, food processors, retailers, grocery stores, office buildings, municipalities and hospitals, just to name a few. Because of their chemical makeup, refrigerant gases contain significant levels of carbon in the form of chlorofluorocarbons (CFCs), hydrochlorofluorocarbons (HCFCs) and perfluorocarbons (PFCs). Use of these compounds has been regulated under the U.S. Clean Air Act for several years.

Greenhouse gases absorb and release radiation into the atmosphere, setting off a global warming effect on earth. The intent and overall goal of GHG tracking relates to better collection and management of the emissions data now so informed decisions can be made about future carbon trading schemes. The tracking protocols also help government entities to more accurately inventory the amounts of emissions reaching the atmosphere. The new GHG legislation puts in motion the data collection, organization, and first stage reporting mechanisms to allow the US to accurately calculate and maintain a GHG emissions baseline across the entire economy. This will allow for better understanding today as well as to determine progress for future Cap and Trade programs. With this accurate information, it can be determined if the guidelines are effective in lowering the harmful effects of these substances to the ozone layer.

Greenhouse Gas tracking involves measuring direct and indirect emissions and keeping extensive records on its usage, maintenance, leak containment and disposal. Heating and cooling systems, as well as other energy consumption, are defined as direct emissions.

Better and more effective GHG management is an objective of the current US government. No longer will the US sit by and watch the world attack the issue of climate change. The US is now taking action to lower carbon emissions to the betterment of future generations. By taking no action, the earth’s makeup would significantly change, with humans and animals adversely affected and marine and plant life severely damaged.

Greenhouse Gas (GHG) management and reporting is now falling under the EPA regulations contained within The U.S. Clean Air Act because the causes of global climate change is now well know. Human activities and the use of global warming substances, like refrigerant gases, are all leading to increased global warming. The substances are carbon dioxide, chlorine, bromine, nitrous oxide, chloroflurocarbons, hydrofluorocarbons, methane, methyl bromide, methyl chloroform, sulfur hexafluoride, hydroxyl, perfluorocarbobs, halons, carbon tetrachloride, fluorine, and the fluorinated gases hydrofluorinated ethers and nitrogen trifluoride. The mandatory law is aimed at reducing the use of these substances to lower the effects of global warming.

Beginning in 2010, GHG management, tracking, and reporting will be environmental law for the highest emitting facilities. Part of the management will revolve around better tracking and reporting of refrigerant gases. Entities must submit usage reports and service records for all refrigerants having high GWP. Special calculations are applied to refrigerants when any leads occur. The GHG emission reporting rules and related protocols allow for progressive companies to take advantage of software already created to help with carbon emissions reporting. Some web applications allow organizations to track GHGs to the asset level across global, distributed facilities.

Software provided by Verisae tracks carbon dioxide (CO2) gas emissions according to The Climate Registry protocols across all sites so companies can manage their carbon emissions and work towards reducing their carbon footprint. To learn more effective refrigerant management tactics and the tools, you can research http://www.Refrigerant-Tracker.com

Food & Technology Key

Hybrid SUV

The Holy Reduction Grail

The hard truth is that we all need to reduce. Reduce the amount of money we spend. Reduce the amount of food we eat…and our waistlines. And reduce the amount of stuff we throw away. In fact new we look at the 3 R’s of reduce, reuse, recycle, they are actually in that order for a reason. It is a hierarchy for a reason and reduce is the Holy Grail. Put in its simplest terms reduce means that we use less of the earth’s resources and in any environmental scheme should be our first priority.

That said, it is also the hardest to accomplish. When I thought about all the things we do to be greener, the number of examples of reducing stumped me. I suppose the most obvious example of our efforts to reduce was the decision some months ago, not to purchase an automobile. My husband has the use of a company van, but even that is rarely used. The difficulty comes when we want to go anywhere as a family. The work van has only one bucket seat in the front that fits three people. Obviously this presents difficulties. Even on our Saturday shopping trips with my mother-in-law, I end up sitting in the back of van; a solution that is both dangerous and illegal for the children. About a year ago, when I was working full-time, we were seriously considering buying a vehicle. But in the end, we thought the expense was too much when you consider not just payments, but insurance, road tax, maintenance and gas. Instead, we signed up for StreetCar; a car rental scheme that you pay a monthly fee to join and an hourly or daily rate only when you need to use a car or van. Looking back, that was one of the best decisions we have made both for the environment and family finances.

The other obvious example I found of reduction was our decision a year ago to switch to bags for life. We now have a stack of them beneath our kitchen sink and faithfully use them for our Saturday shops. But I do admit to occasionally forgetting them when just running out to grab something quickly. When this happens though, we make certain to re-use (we’ll talk more about that tomorrow) any plastic bags we get for outings or for small bin liners. Did you know that in the UK alone 100,000 TONNES of plastic bags are thrown away each year; that is the equivalent of 70,000 cars? So if there is one thing, I can encourage you to do, it is purchase bags for life. My store sells the sturdy plastic ones for about forty pence, the jute ones are about a pound, and the pretty cloth ones are about three pounds with a portion of the proceeds going to charity. Or it is very simple to make your own if you sew.

Speaking of which, sewing and mending our clothes is another excellent way of reducing. My boys from my husband to my sons are always wearing holes in their jeans on the inside thighs. Before the economic downturn, I admit we were likely to just toss them out and purchase new ones. But since I have not been working, we have instead taken them to the drycleaners and had them patched. The cost of the repairs is less than the cost of purchasing new (although I am committed to mending them myself from now on…a further savings). And we have reduced in a very small way the demand for jeans.

Of course, as I sit at my desk in my bedroom I am witnessing another reduction…the daylight streaming in through the open curtains. One of the first things I do each morning is open the curtains and the blinds. By using natural light when and where possible, we are reducing the amount of electricity that we consume and that the power grids must generate. We are also of course saving money on our bills. My husband is a genius at this; going around and turning off and unplugging everything he can each night before bed. I admit though that being American this whole switch on the plug thing still gets me and I often forget to do that, but I am improving. Of course, another example was turning down our thermostat during the winter and wearing heavier layers of clothes instead. In fact, I can think of only a couple of days this winter when we turned our heat on before night fall at all.

These are just a few ideas of ways that our family is reducing. There are many other things that we and you can do to cut back on the things we consume and help save our earth’s precious resources. On Friday as I said, we will do a mini-inventory and I will commit to new ideas on how our family can better live the 3 R’s reduce, re-use, recycle. I will be especially focusing on reducing since this is the most important of the R’s.

Terri O’Neale is the mother of six; ranging in age from 3 to 22. She has been both a working and stay-at-home mother at various times in her life. She was also a single mother for almost five years, before re-marrying the love of her life at the age of forty. Obviously, she has a life-time of training in raising a family on a tight budget. In addition to these real life experiences, she possesses a bachelors degree in health education and a minored in environmental management in her masters programme.

Terri feels strongly that this is one of the most challenging times in history for the family, but she also believes that families with the will and resolve to address the pressing issues of saving money, becoming greener, leading healthier lifestyles and spending more time with one another can endure these challenging times and come out victorious in the end.

Through Frugal Family articles, blogs, videos and social networking, she helps modern families rediscover some lost art forms such as cooking, sewing, and gardening. The goal is not to go back in time or become fanatical, but to help all families find simple and effective ways that fit into their lifestyle to make moderate changes with huge impacts. For more information, check out her blog http://frugalfam.wordpress.com/.